SquidSupport
Product reference / Settings

Stores

In the app: Settings → Stores

Needs the 'View Brands' permission.

A store is one storefront you give support for. Tickets, the inbox, reports and the AI are all divided by store, and each store has its own email, Shopify connection and AI settings. This page lists every store in the organization and is where you create, rename and delete stores and set a store's language and timezone.

Store list

Every store has a card. It shows:

  • the store's name and, under it, its store ID with a slash in front. The ID tells stores apart inside Squid; two stores can have the same name but not the same ID;
  • the setup state, for people with the 'Edit Brands' permission only. A chip next to the name shows how many setup checks are done, for example "3 of 5"; hover over it for a one-line summary. While readiness checks remain unfinished, a "Finish setting up" bar shows the same count with "Start setup" or "Continue setup", which opens the setup guide at the next open item. Optional steps appear under "Later setup" once the guide has offered that list, each with a "Set up" button. If readiness cannot be loaded, the card falls back to channel verification and guide-progress counts;
  • the email state: "No verified email domain", the domain with "DNS verified, forwarding not tested", or the domain with "receiving customer mail";
  • the primary language and the timezone, each with a button to change it;
  • the Shopify shop that is connected, or "No Shopify shop";
  • the "Shopify order sync" switch, for people with the 'Edit Integrations' permission only;
  • at the bottom, the links "Email Settings", "AI Config" and "Integrations", which open those pages for this store.

The menu at the top right of a card has "Open setup guide" (for a store whose guide is finished, for people with 'Edit Brands') and "Delete store…".

By default everyone in your organization sees every store. To limit a teammate to certain stores, change their store access under Settings → Team.

Seeing this page needs the 'View Brands' permission. Creating, renaming, changing language or timezone and deleting need 'Edit Brands'. The rename pencil, the language and timezone buttons, "Add store" and "Delete store…" are shown to everyone who can open the page; without 'Edit Brands' the change is refused when you save. The "Connect" link and the order sync switch are only shown with 'Edit Integrations'.

Someone whose store access is limited (Settings → Team) only sees their own stores here.

With no stores, the page shows "No stores yet" and a "Create your first store" button. If the list cannot be loaded, it shows "Couldn't load your stores." with "Try again".

Create a store

Needs the 'Edit Brands' permission.

"Add store" opens the setup guide on its first screen, "Store basics". Three answers create the store; the rest of the setup is suggested from them.

  • "Store URL": your storefront's web address. Squid takes the domain from it and uses it to suggest the email, return portal and live chat setup.
  • "Store name": the name your team sees everywhere in Squid. It is suggested from the URL; change it if you like.
  • "Store ID": optional; suggested from the name. Lowercase letters, numbers and hyphens only. It must be unique in your organization; if it is taken, the screen suggests a free one. It is not the address of your return portal, which is set separately.
  • "Primary store language" and the store's timezone: see their own sections below.

A new store gets the organization's default return policy. Squid also tries to add the standard set of tags; if that fails, the store is still created and the tags can be added from Settings → Tags.

After the store is created, the rest of Squid keeps showing the store you had selected. The confirmation offers "Switch to" the new store. When no store was selected yet, the new store is selected at once.

Setup guide

Needs the 'Edit Brands' permission.

The store's setup guide walks one store through everything it needs to answer customers. After "Store basics", the first walkthrough covers connecting Shopify, the AI agent, email, live chat and a review screen. Return routing, the return portal and other integrations are offered as optional setup rather than required stops before review.

New stores start in a dialog on this page. Reopening an existing store opens its own setup page:

  • "Add store" opens it on "Store basics" for a new store;
  • "Finish setting up" on a store's card reopens it for a store whose setup is not finished;
  • "Open setup guide" in the card's menu reopens it for a finished store.

What each screen of the guide asks, what "Continue", "Skip" and "Finish later" do, and when a step counts as done are explained in the store's setup guide, which has its own explanation ("Store setup guide"). They are not repeated here.

Everything the guide sets can also be changed afterwards on its own page: Settings → Email, Settings → Chat Widget, Settings → Integrations, Settings → Return Portal and the AI section. The guide is a faster route through them, not a separate set of settings.

Rename a store

Needs the 'Edit Brands' permission.

Click the pencil next to a store's name, type the new name and confirm with the tick (or Enter), or cancel with the cross (or Escape). The card updates after saving. Other views use the new name when they next load the store.

Renaming does not change the store ID or the email domain. Customers can see the new name in places that show the store's name: the chat widget and the return portal are given it, AI replies are signed with it when the store has no agent name of its own, and the sender name of your emails follows it if it uses the store-name variable (Settings → Email). Squid remembers the store's earlier names, so the AI still recognises the store when a customer uses an old name.

Primary language

Needs the 'Edit Brands' permission.

The language button on a card opens "Primary language". Pick a language and click "Save language".

The store's language is used in these places:

  • the return portal and the emails sent from the return flow, and NPS surveys. A language the return portal does not support yet falls back to English there; the dialog warns about this when you pick one;
  • outbound messages: a template is sent in the store's language when the template has a version in that language;
  • automation rules that test the store's language;
  • as the fallback for the customer's language. With customer-language replies enabled, the AI follows the customer's language when it can detect it, using the store's language as a fallback. With customer-language replies disabled, the AI uses the store's language unless an explicit language preference overrides it.

Changing the language also moves the email sign-off to the new language if the sign-off is still the standard one for the old language. A sign-off you wrote or picked yourself is kept. The note in the dialog says the setting does not control the AI's language or the sign-off; the two points above are the exceptions.

A new store starts with the organization's "Default language for new stores" (Settings → Organization), or English.

Timezone

Needs the 'Edit Brands' permission.

The timezone button on a card opens the timezone picker; "Save timezone" stores it. When a store is still on UTC and your browser is in another timezone, the card offers "This browser is on … — use that instead".

The store's timezone is used for that store's chat support hours when the hours have no timezone of their own (Settings → Chat Widget), and for the dates of supplier follow-ups in Basecamp. It does not change the timezone your reports are grouped in; that is the "Report timezone" under Settings → Organization.

Shopify shop and order sync

The card shows the Shopify shop connected to the store, with a link to it, or "No Shopify shop". People with 'Edit Integrations' also get a "Connect" link to Settings → Integrations, where a shop is connected, and the order sync switch below. One store has one shop.

"Shopify order sync" reads the shop's orders and refunds into Squid so they appear in the refund report. It is on by default once a shop is connected.

  • Switching it on tries to queue the store's order history. When a run is queued, the page says the first results show after about 15 minutes. Otherwise it says syncing will start on the next scheduled run. Nothing runs while syncing is paused platform-wide.
  • Switching it off stops future sync runs. It does not cancel a run already underway or remove orders already loaded. Reconnecting Shopify switches order syncing back on, even if you turned it off before.
  • Without a connected shop the switch cannot be turned on: connect a shop first.
  • "Sync is paused platform-wide" means Squid has order syncing switched off for now. Your choice is kept and starts working when it is switched on again.

Delete store

Needs the 'Edit Brands' permission.

"Delete store…" in a card's menu opens the "Delete store" dialog. It shows the store's ID, timezone and number of tickets, and what will happen.

Deleting removes the store's configuration:

  • its email domain setup;
  • its AI prompts and specialists;
  • its chat widget, which disappears from the storefront;
  • its integration settings;
  • everything else that belongs only to this store, such as its automation rules, tags, return addresses and return reasons. The dialog does not list these.

It never deletes ticket history, and for that reason a store can only be deleted when it holds no tickets. If it still has tickets, tickets in the trash included, deleting is blocked: export them first if you need a copy, then move them to the trash and empty it. Exporting alone does not remove tickets or unblock deletion. The last store of an organization cannot be deleted either; create another store first.

To confirm, type the store's ID (not its name) in the field. Deleting cannot be undone.